Business Unique

Blog

Practical and Helpful Tips: Machines

The Benefits of Cutting Substances With Waterjet Cutting

Waterjet cutting is a technology applied to the cutting of metals and other materials in the industrial process. It involves the use of a high-pressure water jet in combination sometimes with plasma or oxy-fuel cutting. The fact that a waterjet machine is a precision instrument means that the cut produced is very clean. This the reason why it is normally preferred for cutting of materials that require minimal damage to the cut parts, and also where wastage of material is undesirable especially if such material is expensive. The cutting method finds its application in various industrial process in the manufacture and fabrication of producrts made of metal and other hard materials. Numerous benefits can be realized from the use of this method of cutting substances. Below are outlined some advantages of waterjet cutting.

When cutting using a waterjet machine, there is no heat evolved. Most of the traditional methods of cutting hard materials such as metal normally uses heat. The cutting is done at very high temperatures that are capable of melting even metal. Heat may destroy the material being worked on if the material cannot withstand high temperatures. Such materials may either be melted or deformed by heat, thereby rendering them unusable. But waterjet cutting can easily be used for such materials because it works with pressure rather than heat.

There’s very little wastage of material because it has a very high precision of cutting. Waterjet cutting deals with a high degree of precision. The waterjet machine makes cuts in the material which are very narrow in width, sometimes under a millimeter. Thus, there is minimal wastage of the material being cut in comparison to the other cutting methods. And the fact that it is carried out on the computer with an advanced software means that it is even more precise as compared to other cutting approaches.

Various materials can actually be cut using the waterjet method. Laser and plasma cutting, as well as use of oxy-fuel flame normally involve lots of heat This implies that such methods are not suitable for cutting through materials that are either heat intolerant or soft. On the contrary, waterjet cutting is applicable to all materials, thereby making it quite multipurpose.

The other benefit of using waterjet cutting is the fact that it leaves very little debris after cutting. Other means of cutting sometimes leave the cut surface warped and deformed such that I needs to be smoothed through grinding of using a sand paper. Conversely, surfaces cut with a waterjet machine hardly need any extra finishing due to the fact that they are normally as clean as they can get. The cleanup work is therefore considerably reduced, meaning that the industry can commit labor to other productive tasks.

Case Study: My Experience With Waterjets

Overwhelmed by the Complexity of Equipment? This May Help